Payment & Shipping Terms:
|Fire Resistance:||UL 94V-2||Length:||10|
|Precision:||MT 7||Environmental Standard:||RoHS|
plastic injection molded parts,
plastic injection molded products
Customized Plastic Injection Molding Products 5mm White Plastic U Clamp
Plastic U clamp injection molding parts are made of POM material for electric device , U clamp injection molding part is deigned as “ U “ shape with stepped section inside and outside for clamping parts and good clip .
Plastic injection molding U clamp parts are made of POM that with good mechanical property and performances on electric ,thermal and physical features .
|Water absorption %||2.5|
Physical Performance for U clamp
|Tensile strength MPa||70|
|Elongation at break %||40|
|Bending strength MPa||90|
|Modulus of elasticity for tension MPa||3160|
|modulus of elasticity for bending MPa||2880|
|Compressive strength MPa||127|
|Shearing strength MPa||67|
|Notched Impact Strength(J/m)||76|
Mechanical Property for U clamp
|Heat distortion Temperature(1.82MPa)℃||110|
|Normal working temperature ℃||80|
|Working temperature arrange ℃||-40℃～90℃|
|Coefficient of linear expansion (×10K)||7.5|
|Heat conduction W/(m·K)||0.23|
|Specific volume resistance Ω·cm||10|
|Specific inductive capacity(10Hz)||3.8|
|Dielectric loss tangent (10Hz)||0.005|
Thermal Performance for U clamp
Dimensions and tolerances
U clamp plastic injection molding parts are customized for individual design with different dimensions ; Tolerances for normal dimensions are ±0.1 mm and tolerances of unmarked dimensions according to ISO2768-M .
Unspecified tolerance ISO 2768-M
U clamp plastic injection molding parts are made of POM that with good characteristics
High mechanical strength
Good wear resistant
Stability in dimensions
Resistant Organic solvent
Small creep properties
Low water absorption
There are more materials for U clamp plastic injection molding parts you may need PVC ,PA ,ABS ,PC and Rubber .
Tips for use
POM injection molded base washer shim parts are easy to be cracked and pulverized outside long-term .
Don’t put POM injection molded base washer shim parts under temperature over 100℃
Don’t put POM injection molded base washer shim parts under circumstance with alkali and oxidant .
Contact Person: MR.LIN