Payment & Shipping Terms:
|Fire Resistance:||UL 94V-0||Length:||100|
High Tensile Plastic Injection Molding Products 100mm PMMA Holder Bar Parts
High tensile strength plastic injection molded holder bar parts are made of PMMA that are a quite good choice for electric communication device
With long service 5～8 years and keep color well .
Suitable deigns for easy operation
Resistant damp and water proof
Up to 92% light transmittance
Quite light weight only half to glass
Plastic holder bar injection molded part are made up of 12 square sockets and two small pin holes and a fixing pin at one end , half circle socket and a rectangle socket in the middle for supporting working piece .
PMMA (polymethyl methacrylate )
All sizes are millimeter
|Basic Sizes||Tolerance level|
|Density ( g/cm3)||1.2|
|Water absorption %||0.4|
|Light transmittance %||92|
|Tensile strength kgf/mm2||6～7|
|Compressive strength kgf/mm2||12～14|
|Elongation at break %||50|
|Bending strength MPa||110|
|Modulus of elasticity for bending MPa||2400|
|Notched Impact Strength MPa(kgf/mm)||4|
|Modulus of elasticity for tension GPa||3|
|Heat distortion temperature ℃||68～69|
|Coefficient of linear expansion ℃||0.00005—0.00009|
|Normal working temperature ℃||-60～65|
|Brittle temperature ℃||-60℃|
|Melting temperature ℃||240～270|
|Pyrogenic decomposition temperature ℃||270℃|
|Specific volume resistance Ω·cm||1015|
|Arc resistance sec||120|
Its 10 times to silicon glass on ductility
The strength is about 200 times to common glass .
Based on UL94V-0 level .
PMMA parts is nontoxic material meet related standards .
Perfect light transmittance to reduce related device with electricity .
Available for different climates .
Tensile strength and light transmittance for PMMA parts are only reduce a little after 4 years .
Plastic injection molded parts with standard and non-standard are available for us , and we are good at developing new projects with complicated designs .
★ Professional design team
★ Skillful works
★ Quick delivery
★ Individual Service