|
Product Details:
Payment & Shipping Terms:
|
| Material: | Brass | Hardness: | HV110 |
|---|---|---|---|
| Finish: | Polishing | Roughness: | Ra1.0 |
| OD: | 10 | Length: | 30 |
| ID: | 6 | Chamfer: | 0.5 X 45° |
| High Light: | bushings and bearings,metric bushings |
||
Chamfered Ends Plain Bearing Bush 10X30 Bronze Shaft Bushings for Axle Bearings
Shaft bushing is also known as a bush or a sleeve and used for axle bearing or plain bearing to prevent it from wearing and extend service .
Shat bushings are in stationary condition for axle bearings or plain bearings that are inserted to it , between shaft bushing and bearing will be happened much friction when bearings are rotating , so the touched area of shaft bushings and bearings must to be applied lubricant to reduce friction .
Shaft bushings are made of bronze material for plain bearing with perfect performances .
A Durable
B Low friction
C Low wear
D Resistant to high temperatures
E Corrosion resistant.
F High load-carrying capacity
Shaft bushings with a number of specifications for different axle bearing applications in industry . we can offer standard sizes from 4 to 300 mm diameter and length 100 mm , we are also available for oversize of 100 mm
Unit : mm
| d | D | Thickness | L | |||||||||||||||
| 4 | 6 | 8 | 10 | 12 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | |||
| 4 | 5.5 | 0.75 | ● | ● | ||||||||||||||
| 5 | 8 | 1 | ● | ● | ● | |||||||||||||
| 6 | 10 | 1 | ● | ● | ● | |||||||||||||
| 8 | 12 | 1 | ● | ● | ● | |||||||||||||
| 10 | 14 | 1 | ● | ● | ● | ● | ||||||||||||
| 12 | 15 | 1 | ● | ● | ● | ● | ||||||||||||
| 13 | 16 | 1 | ● | ● | ● | |||||||||||||
| 14 | 17 | 1 | ● | ● | ● | |||||||||||||
| 15 | 18 | 1 | ● | ● | ● | ● | ||||||||||||
| 16 | 20 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 18 | 21 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 20 | 23 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 22 | 25 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 24 | 27 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 25 | 28 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 28 | 31 | 1.5 | ● | ● | ● | ● | ||||||||||||
| 28 | 32 | 2 | ● | ● | ● | ● | ||||||||||||
| 30 | 34 | 2 | ● | ● | ● | ● | ||||||||||||
| 32 | 36 | 2 | ● | ● | ● | ● | ||||||||||||
| 35 | 39 | 2 | ● | ● | ● | ● | ||||||||||||
| 38 | 42 | 2 | ● | ● | ● | ● | ||||||||||||
| 40 | 44 | 2 | ● | ● | ● | ● | ||||||||||||
| 45 | 50 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 50 | 55 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 55 | 60 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 60 | 65 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 65 | 70 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 70 | 75 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 75 | 80 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 80 | 85 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 85 | 90 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 90 | 95 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 95 | 100 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 100 | 105 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 105 | 110 | 2.5 | ● | ● | ● | ● | ||||||||||||
| 110 | 115 | 2.5 | ● | ● | ● | |||||||||||||
| 115 | 120 | 2.5 | ● | ● | ● | |||||||||||||
| 120 | 125 | 2.5 | ● | ● | ● | |||||||||||||
| 125 | 130 | 2.5 | ● | ● | ||||||||||||||
| 130 | 135 | 2.5 | ● | ● | ||||||||||||||
| 135 | 140 | 2.5 | ● | ● | ||||||||||||||
| 140 | 145 | 2.5 | ● | ● | ||||||||||||||
| 150 | 155 | 2.5 | ● | ● | ||||||||||||||
| 160 | 165 | 2.5 | ● | ● | ||||||||||||||
| 170 | 175 | 2.5 | ● | ● | ||||||||||||||
| 180 | 185 | 2.5 | ● | ● | ||||||||||||||
| 200 | 205 | 2.5 | ● | ● | ||||||||||||||
| 220 | 225 | 2.5 | ● | ● | ||||||||||||||
| 250 | 225 | 2.5 | ● | ● | ||||||||||||||
| 300 | 305 | 2.5 | ● | ● | ||||||||||||||
Note
Tolerance for above different lengths
| Length | Tolerance |
| 4~12 | ±0.25 |
| 12~60 | ±0.5 |
| 60~100 | ±0.75 |
Tolerances for Shaft Bushings
Normally, both ends of Shaft bushings are with chamfer for free of scratching during installation and operation .
| T | Outside Chamfer | Inside Chamfer | |
| Machined | Rolled | ||
| 0.75 | 0.5±0.3 | 0.5±0.3 |
-0.4 -0.1 |
| 1 | 0.6±0.4 | 0.6±0.4 |
-0.5 -0.1 |
| 1.5 | 0.6±0.4 | 0.6±0.4 |
-0.7 -0.1 |
| 2 | 1.2±0.4 | 1.2±0.4 |
-0.7 -0.1 |
| 2.5 | 1.8±0.6 | 1.8±0.4 |
-1.0 -0.2 |
Shaft bushings are widely used to various fileds with bearing operations .
★ Truck and Car
★ Train
★ Machine
★ Vessel
★ Aerospace
★ Sport equipments
★ Airplane
Bronze Shaft bushings normally are not to be plated , but sometimes to be plated for improving performance on wear resistance
Zinc
The most popular plating for the most products , making parts are bright and smooth and resistant corrosion
Nickel
The film thickness is 1～3μm , it improves brightness and wear resistance .
Polishing
Reduce roughness of parts and improve brightness .
Tin
With film thickness 0.13～1.27μm , tin finish with bright surface and good ductility ,corrosion resistance ,lower melting point ,eco-friendly features .
Competitive Advantages
※ Top quality with cheap price
※ Strict dimensions control and high precision
※ All are eco-friendly
※ Quick delivery
※ Perfect sales-after service
Besides bronze shaft bushings , we also manufacture stainless steel shaft bushings ,Brass shaft bushings ,Carbon steel shaft bushings and Aluminum shaft bushings . If you are interesting in our shaft bushings , please call us 86-769-82601418 or email group1@vedali.com , Thanks .
Contact Person: MR.LIN
Tel: +8613556778272
| Factory Address:NO.12 HUANGHE RD ,HUANGJINAG , DONGGUAN, GD,CHINA | |
| Sales office:NO.12 HUANGHE RD ,HUANGJINAG , DONGGUAN, GD,CHINA | |
| +86-769-82601418 | |
| group1@vedali.com | |
