Payment & Shipping Terms:
|Material:||Nylon||Property Class:||PA 66|
|Fire Resistance:||UL 94V-2||Diameter:||45|
plastic injection molded parts,
plastic injection molded products
Injection Molded Plastic Washer Bushing 45mm Oyster Double Round Body Design
Special plastic injection molding fixing washer bushing has a double round body design that smaller one is placed in bigger one and both are connected by four bars , there is a hole in middle of bar for further fixing purpose when it is assembled with other pieces .
Plastic injection molding fixing washer bushing is made from nylon PA with grade 66 , this material is quite good for high requirements on assembly and use conditions .
Low friction and good self-lubricant for a long service
Wide working temperature from -30℃ to 150℃ for the most areas with different climate .
Colorful choices for many demands
Specification for Plastic injection molding fixing washer bushing
Outside diameter : 30 mm
Small round diameter: 25 mm
Height : 10 mm
Note : we accept customized sizes for different design on construction
Physical Performance for Plastic injection molding fixing washer bushing
|Density ( g/cm3)||1.14|
|Water absorption %||3|
Mechanical Property for Plastic injection molding fixing washer bushing
|Tensile strength MPa||60～80|
|Elongation at break %||2.2|
|Bending strength MPa||100～120|
|Modulus of elasticity for bending MPa||2000 ～3000|
|Notched Impact Strength(J/m)||60～100|
Thermal Performance for Plastic injection molding fixing washer bushing
|Normal working temperature ℃||80～120|
|Brittle temperature ℃||-30℃|
|Melting temperature ℃||252|
|Pyrogenic decomposition temperature ℃||350℃|
|Matin heatproof ℃||50～60|
Electrical Performance for Plastic injection molding fixing washer bushing
|Arc resistance sec||130～140|
|Specific volume resistance Ω·cm||1.83×1015|
Features for Plastic injection molding fixing washer bushing
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
Elongation at break is 2.2% according to ISO 527 testing method .
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
60 – 80 KJ/M2 normally .
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
Resistance to low temperature
Parts can be workable at -30℃
Parts meet RoHS or REACH environmental production standard .
We manufacture different plastic injection molding or molded parts with materials cover PA ,ABS ,PC ,PMMA ,PVC and PE etc , and we can provide Customization service with good quality ; Small MOQ is accept .
Contact Person: MR.LIN