Payment & Shipping Terms:
plastic injection molded parts,
plastic injection molded products
RAL7035 Plastic Injection Molding Products Light Grey M22 Plastic Threaded Caps
Grey cap injection molded part with threaded inside hole is made from nylon material ( PA 66 ) , there is a start gear hole in the centre of top , and inside machine threads for fixing cap on another part .
Injection molded cap part has grooves on side surface , it is easy to screw cap out or in by hand .
This plastic injection molded cap part is designed for communication device .
Plastic injection molded cap part is made from Nylon with grade 66 , RAL 7035 color .
|Start hole diameter||12|
1 , Wear resistance
2 , Good self-lubricant
3 , High mechanical property
4 , Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
5 , Perfect elongation
Elongation at break is 2.2% according to ISO 527 testing method .
6 , Corrosion resistance
7 , Good insulation
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
8 , Resistant impact
60 – 80 KJ/M2 normally .
9 , Resistant fire
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
10 , Resistance to low temperature
Parts can be workable at -30℃
|Tensile strength MPa||60～80|
|Elongation at break %||2.2|
|Bending strength MPa||100～120|
|Modulus of elasticity for bending MPa||2000 ～3000|
|Notched Impact Strength(J/m)||60～100|
|Arc resistance sec||130～140|
|Specific volume resistance Ω·cm||1.83×1015|
Additional Color choices
We are able to provide full colors based RAL standard for your vast demands . eg
More colors for plastic injection molded parts , please contact us .
Contact Person: MR.LIN