Payment & Shipping Terms:
|Material:||Nylon||Property Class:||PA 66|
|Fire Resistance:||UL 94V-2||Length:||150|
|Precision:||MT 7||Environmental Standard:||RoHS|
plastic injection molded products,
plastic injection moulding parts
25mm x 150mm Plastic Injection Moulding Parts Holder Panel for Antenna Device
Rectangle plastic injection molding holder panel with customized design for antenna device applied , injection molding holder panel has different shape through holes that are riveted into another part with suitable sockets for getting a good fixing purpose , and several holes placed both ends and middle sections for further fixing by screws .
As application requests are critical for injection molding holder panel , it is made from polyamide ( PA ) with property class 66 , this material with perfect comprehensive properties .
High mechanical property
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
Elongation at break is 2.2% according to ISO 527 testing method .
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
60 – 80 KJ/M2 normally .
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
Resistance to low temperature
Parts can be workable at -30℃
Parts meet RoHS or REACH environmental production standard .
Specification for plastic injection molding holder panel
Length : 150 mm
Width : 20 mm
Thickness : 3 mm
More dimensions for holder panel please contact us , customized sizes
Precision for plastic injection molding holder panel
We refer to ISO 2768-m with level MT7
Unit : mm
Thermal Performance for plastic injection molding holder panel
|Specific volume resistance Ω·cm||1.83×1015|
|Matin heatproof ℃||50～60|
Mechanical Property for plastic injection molding holder panel
|Tensile strength MPa||60～80|
|Elongation at break %||2.2|
|Bending strength MPa||100～120|
|Modulus of elasticity for bending MPa||2000 ～3000|
|Notched Impact Strength(J/m)||60～100|
Physical Performance for plastic injection molding holder panel
|Density ( g/cm3)||1.14|
|Water absorption %||3|
|Normal working temperature ℃||80～120|
|Brittle temperature ℃||-30℃|
|Melting temperature ℃||252|
|Pyrogenic decomposition temperature ℃||350℃|
Tips for plastic injection molding holder panel
As PA material with water absorption , please don’t put injection molding holder panel parts under water for a long time to avoid changes on dimensions for parts .
Don’t keep plastic injection molding holder panel parts outside to prevent from fading .
Contact Person: MR.LIN