Payment & Shipping Terms:
metal stamped parts,
stamping metal parts,
elevator connecting beam stamping parts
High Tensile Strength Metal Stamping Parts , Carbon Steel Elevator Connecting Beam
What is Elevator connecting beam stamping parts ?
Elevator connecting beam stamping parts are made of high tensile strength carbon steel with free chrome that meet request of “ RoHS “ standard . Connecting beam stamping parts are made in a steel panel and bended to upper direction and lower direction with distance and two holes are placed on both direction panels .
What is material for elevator connecting beam stamping parts ?
Carbon steel SWRCH 1018 with harden treatment .
What is finish for elevator connecting beam stamping parts ?
Blue zinc with chrome free .
What are the sizes for elevator connecting beam stamping parts ?
All dimensions are millimeter
What are tolerances for elevator connecting stamping parts ?
Normal dimensions are based on +/-0.1 mm tolerance , and refer to ISO 2768 M for unspecified sizes as following
What finish for elevator connecting stamping parts ?
They are plated in blue zinc free chrome .
What characteristics for elevator stamping parts ?
Elevator connecting beam stamping parts just are bended from a steel panel with several holes for screw assembly but are quite practicable .
No burrs and no sharp edges
All edges are chamfered and remove all burrs during production .
Hard material with high tensile strength
Elevator connecting beam stamping parts are harden in production to improve strength .
Easy to be operated
Just secure connecting beam stamping parts in screw or bolt with nuts .
Corrosion resistance for a long time
Elevator connecting beam stamping parts are plated in blue zinc with eco-friendly and with 48 hours salty spray testing .
Elevator connecting beam stamping parts are meet request of “ RoHS “ free chrome .
What packing for elevator connecting stamping parts ?
Normally , pack in bulk with 100 pcs each bag , customized packages are available for us as well .
Contact Person: MR.LIN