Payment & Shipping Terms:
|Material:||Stainless Steel||Property Class:||A2-70|
metal stamped parts,
metal stamping products
Precision Metal Stamping Parts Polished Stainless Steel Motor Support
Stainless steel support stamping parts are stamped a plate socket and bended a clip in strip , bended upper section to fix or secure support stamping part on object and supporting socket with flat panel is used to support something of motor .
Support stamping parts are made of high tensile strength stainless steel 18-8 that with good performance or properties .
Tensile strength σb (MPa)
Yield Strength σs (MPa)
Elongation δ5 (%)
Reduction of area ψ (%)
Mechanical property of support stamping parts
1398 to 1454
Specific heat capacity(0~100℃,KJ·kg-1K-1)
Thermal performance of support stamping parts
Electrical performance of support stamping parts
Length : 25 mm
Width : 25 mm
Height : 15 mm
Thickness : 0.8 mm
Chamfer : 0.5 x 45°
Note : we accept customized sizes from 0.5 mm to 5 m for different designs .
+/-0.1 mm for normal sizes , and refer to following tolerances standard for unspecified sizes .
Stainless steel support stamping parts for motor have high tensile strength and good performance to meet continuous high-load working .
◆ High tensile strength
Tensile strength is up to 535 σb (MPa) and more higher after heat treatment .
◆ Perfect elongation
50 δ5 (%) to ensure support stamping parts have enough elongation under heavy load and pressure . .
◆ Hard material
Support stamping parts are made of stainless steel 18-8 that hardness is HRC 72 or so .
◆ Resistance to corrosion
Stainless steel 18-8 with good performance on anti-corrosion by itself . normally , not to be rusted in 5 years inside conditions .
Its nearly no magnet for stainless steel 18-8 support stamping parts .
Polishing for support stamping parts
Contact Person: MR.LIN