Payment & Shipping Terms:
|Fire Resistance:||UL 94V-2||Length:||20|
plastic injection molded products,
plastic injection moulding parts
MT 5 Plastic Injection Molding Products 2 Socket POM Fixing Clamp UL94V-2 20 X 10mm
Plastic injection molding fixing clamp has two sockets in base that is used to support secure places for another part , two rectangle clamp on both sides to fix part further .
Plastic injection molding fixing clamp part is made from POM with white color .
|Chamfer||0.5 x 45°|
General tolerances is +/- 0.1mm and refer to ISO 2768 – m for unspecified dimensions .
ISO 2768- m tolerances
All are in millimeters
Tolerances values based on “ ± “ .
|Tensile strength MPa||62|
|Elongation at break %||60|
|Bending strength MPa||98|
|Modulus of elasticity for tension MPa||2830|
|modulus of elasticity for bending MPa||2600|
|Compressive strength MPa||110|
|Shearing strength MPa||54|
|Notched Impact Strength(J/m)||65|
|Specific volume resistance Ω·cm||10|
|Specific inductive capacity(10Hz)||2.7|
|Dielectric loss tangent (10Hz)||0.007|
|Heat distortion Temperature(1.82MPa)℃||124|
|Normal working temperature ℃||100|
|Working temperature arrange ℃||-40℃～100℃|
|Coefficient of linear expansion (×10K)||8.5|
|Heat conduction W/(m·K)||0.23|
High mechanical strength
Tensile strength can be up 50.5MPa . close to metal properties . and only a tiny change on mechanical strength even working temperature has a large change .
Good wear resistant
Wear resistant strength still keeps 35MPa or so even item is put 10 J variable load . it is best compared to items that with PA,ABS,HPVC,PS,PC
POM has good impact resistance but inferior to ABS and PC , Impact performance will be down 90% or so if there is breaking on or in product .
POM parts with F4 , C ,MoS2 ,PE and lubricant elements that improve self-lubricant performance .
Stability in dimensions
POM part with good tensile strength and hardness that not easy to be deformed and broken .
Resistant Organic solvent
POM parts are resistant for hydrocarbon ,alcohol ,ether ,aldehyde , gasoline ,lubricant and Weak Alkalis .
POM items nearly not be effected by temperature and humidity on insulation . insulation is related with the thickness of items , eg when thickness is 0.127mm insulation is 82.7kV/mm,thickness is 1.88mmi insulation is 23.6kV/mm
Please contact us for more information for plastic injection molding fixing clamp , and we will give you professional suggestions and help you to design .
Contact Person: MR.LIN