Payment & Shipping Terms:
|Fire Resistance:||UL 94V-2||Length:||115|
|Tensile Strength MPa:||30||Standard:||Customization|
plastic injection molded products,
plastic injection moulding parts
Injection Transparent Plastic Molded Boxes For Heavy Load Packing 115 x 85 x 90 mm
Environment friendly injection molding boxes for packing which are made from PP material and with high tensile strength for heavy load purpose . PP injection molding boxes are designed in rectangle shape and a strengthen rib in centre each side that enhance box to support heavy load .
The cap of box is separated , a block with scale on top surface is easy for read and a strengthening purpose as well . the lip of box is higher than centre area , this design makes boxes can be stacked steadily layer by layer .
In order to moving , plastic injection molding boxes have a laptop that placed both sides .
Key Features for Plastic Injection Molding Boxes
Quite strong material
Big volume capacity
Specifications for Plastic Injection Molding Boxes
Unit : mm
Thermal Performance for Plastic Injection Molding Boxes
|Heat conduction 10-4cm||3|
|Heat distortion temperature ℃||94|
|coefficient of linear expansion k||0.00011|
|Normal working temperature ℃||15～60|
|Brittle temperature ℃||-35℃|
|Melting temperature ℃||170|
|Pyrogenic decomposition temperature ℃||350|
Mechanical Property for Plastic Injection Molding Boxes
|Tensile strength MPa||30|
|Elongation at break %||200|
|Bending strength MPa||42～56|
|Modulus of elasticity for bending MPa||2000|
|Notched Impact Strength MPa(kgf/mm)||35|
|Modulus of elasticity for tension MPa||1500|
Special Characteristics for Plastic Injection Molding Boxes
Continuous working temperature can be 110 -120℃ and will not deformed even temperature is up to 150℃ .
PP parts are water proof and not effect with the most chemicals
PP parts with high crystallinity
Tips for use
PP injection molding box parts are not suitable for quite low temperature that below -30℃ .
PP injection molding box parts are easy to be aged as light , heat and oxygen .
PP injection molding box parts with high static
Contact Person: MR.LIN