Payment & Shipping Terms:
|Masterial:||POM||Fire Resistance:||UL 94 V-10|
|Nylon Volume:||10 Daizi Michagnlv Zen Me Jnonh|
plastic injection molded parts,
plastic injection moulding parts
30 x 15mm Plastic Injection Moulding Parts Fixed Seat For Communication Device
With good self-lubricant performance POM plastic injection molded fixed seat for communication device accessory , two stepped holes in body and a hex socket above holes for locating hex bar or rod , a pillar with groove and clipped snap ; four sockets in the front of body , two clamp panel are placed on top of socket .
Material for Plastic Injection Molded Fixed Seat Part
They are made of POM with high tensile strength and hard surface for wear resistance .
Sizes for Plastic Injection Molded Fixed Seat Part
All sizes are millimeter
Tolerances for Plastic Injection Molded Fixed Seat Part
Physical Performance for Plastic Injection Molded Fixed Seat Part
|Water absorption %||2.1|
Mechanical Property for Plastic Injection Molded Fixed Seat Part
|Tensile strength MPa||62|
|Elongation at break %||60|
|Bending strength MPa||98|
|Modulus of elasticity for tension MPa||2830|
|modulus of elasticity for bending MPa||2600|
|Compressive strength MPa||110|
|Shearing strength MPa||54|
|Notched Impact Strength(J/m)||65|
Thermal Performance for Plastic Injection Molded Fixed Seat Part
|Heat distortion Temperature(1.82MPa)℃||124|
|Normal working temperature ℃||100|
|Working temperature arrange ℃||-40℃～100℃|
|Coefficient of linear expansion (×10K)||8.5|
|Heat conduction W/(m·K)||0.23|
Features for Plastic Injection Molded Fixed Seat Part
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
Elongation at break is 2.2% according to ISO 527 testing method .
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
60 – 80 KJ/M2 normally .
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
Resistance to low temperature
Parts can be workable at -30℃
Parts meet RoHS or REACH environmental production standard .
What attentions for POM plastic injection molded fixed seat parts ?
1 , easy to be cracked and pulverized outside long-term .
2 ,Don’t put parts under temperature over 100℃
3 , Don’t put parts under circumstance with alkali and oxidant .
Do you have any suggestions for instead material for POM ?
There are many different plastic materials like PA , PC ,PMMA ,PP and ABS ,they are different on performances , we can give you professional advices according to your requirements .
How many days for a new developing mold ?
Normally one week .
How many days for delivery ?
Different quantity and requests different days .
Contact Person: MR.LIN